Safety Signs - Exmark Laser Z Operator's Manual

Laser z series
Hide thumbs Also See for Laser Z:
Table of Contents

Advertisement

POTENTIAL HAZARD
♦ Engine coolant is toxic.
WHAT CAN HAPPEN
♦ Swallowing coolant can cause poisoning.
HOW TO AVOID THE HAZARD
♦ Do not swallow
♦ Keep out of reach of children and pets.
For Kohler 26 HP EFI Units:
POTENTIAL HAZARD
♦ Fuel system components are under high pressure.
WHAT CAN HAPPEN
♦ The use of improper components can result in system
failure, gasoline leakage and possible explosion.
HOW TO AVOID THE HAZARD
♦ Use only approved fuel lines and fuel filters for high
pressure systems.

1.6 SAFETY SIGNS

1.6.1
Keep all safety signs legible. Remove all grease, dirt and debris from safety
signs and instructional labels.
1.6.2
Safety signs must be replaced if they are missing or illegible.
1.6.3
When new components are installed, be sure that current safety signs are
affixed to the replaced components.
1.6.4
New safety signs may be obtained from your authorized Exmark equipment
dealer or distributor or from Exmark Mfg. Co. Inc.
1.6.5
Safety signs may be affixed by peeling off the backing to expose the adhesive
surface. Apply only to a clean, dry surface. Smooth to remove any air bubbles.
1.6.6
Familiarize yourself with the following safety signs and instruction labels. They are critical to
the safe operation of your Exmark commercial mower.
CAUTION
WARNING
- 6 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents