Dimensions - Exmark Lazer LZE Operator's Manual

Table of Contents

Advertisement

Specifications
– 60 and 72 inch Decks: 5V Section belt with
self-tensioning idler.
– 96 Inch Deck: One 5V belt on center deck.
One "A" Section belt on each wing.
• Deck:
– Side Discharge: Full floating deck is attached
to out-front support frame. Anti-scalp rollers
provide maximum turf protection. Deck
design allows for bagging, mulching or side
discharge.
◊ 48 inch Deck: 3 anti-scalp rollers
◊ 52 inch Deck: 3 anti-scalp rollers
◊ 60 inch Deck: 4 anti-scalp rollers
◊ 72 inch Deck: 6 anti-scalp rollers
– Rear Discharge: Full floating deck is attached
to out-front support frame. Anti-scalp rollers
and side bumpers provide maximum turf
protection. Deck design allows for rear
discharge or finish cut (reduced discharge).
◊ 60 inch Deck: 4 anti-scalp rollers
◊ 72 inch Deck: 4 anti-scalp rollers
◊ 96 Inch Deck: 13 anti-scalp rollers
• Deck Depth—All Deck Series: 5.5 inches (14 cm)
• Cutting Height Adjustment:
– For Non-Wing Deck Models: Foot activated
lever is used to adjust the cutting height from
1 inch (2.5 cm) to 5 1/2 inches (14 cm) in 1/4
inch (6.4 mm) increments.
– For Wing Deck Models: Pressing the deck lift
switch causes a hydraulic cylinder to raise or
lower the deck and side wings.
• Mulching Kit: Optional.

Dimensions

Overall Width
Side Discharge Models:
48 inch Deck
Without Deck
45.7 inches
(116.1 cm)
Deflector Up
51.8 inches
(131.6 cm)
Deflector Down 59.6 inches
(151.4 cm)
Side Discharge Models:
60 inch Deck
Without Deck
53.0 inches
(134.6 cm)
Deflector Up
62.5 inches
(158.8 cm)
Deflector Down 72.8 inches
(184.9 cm)
Rear Discharge Models:
60 inch Deck
Without Deck
53.0 inches
(134.6 cm)
With Deck
66.2 inches
(168.1 cm)
96 inch Deck (Working
width)
101.3 inches (257.3 cm)
22
52 inch Deck
45.7 inches
(116.1 cm)
56.3 inches
(143.0 cm)
64.8 inches
(164.6 cm)
72 inch Deck
59.1 inches
(150.1 cm)
73.5 inches
(186.7 cm)
84.9 inches
(215.6 cm)
72 inch Deck
59.1 inches
(150.1 cm)
78.2 inches
(198.6 cm)
96 inch Deck (Transport
width set at 3 inch height
of cut)
72.5 inches (184.2 cm)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lazer zLazer z seriesLazer lzsLazer lzx406294 ... Show all

Table of Contents