Maintaining Your 600I2 Interactive Whiteboard System; Preventing Damage To Your Interactive Whiteboard; Cleaning Your Interactive Whiteboard - SMART Board Board 600i2 Configuration And User's Manual

Interactive whiteboard system
Table of Contents

Advertisement

Maintaining Your 600i2 Interactive Whiteboard System

In This Chapter
This chapter includes methods to prevent damage to, and to properly clean your SMART Board 600i2 interactive
whiteboard system. Follow the additional instructions and recommendations see your Installation and User's
Guide
(document
1414) to properly maintain your interactive whiteboard

Preventing Damage to Your Interactive Whiteboard

Cleaning the Interactive Whiteboard
Cleaning the Pen Tray
Cleaning the Unifi 45 Projector
Preparing to Replace the Projector Lamp
Preventing Damage to Your Interactive Whiteboard
Although the SMART Board 600 series interactive whiteboard surface is very durable, take these precautions to
prevent damage to the interactive screen and to other components.
Don't use sharp or pointed objects, such as ballpoint pens or pointers, as writing tools.
Never use abrasive erasers or harsh chemicals when cleaning.
Never leave adhesive tape on the writing surface for extended periods. Lifting the tape may remove the
coating that provides the interactive whiteboard's dry-erase capability.
Avoid setting up and using your interactive whiteboard in an area with excessive levels of dust, humidity
or smoke.

Cleaning Your Interactive Whiteboard

For additional cleaning instructions, refer to your 600 series Installation and User's Guide
proper care, your SMART Board interactive whiteboard will provide years of trouble-free service. Follow these
tips to keep the screen surface clean:
NOTE: Before you clean your 600 series interactive whiteboard, shut down the computer or unplug the USB
cable connecting your interactive whiteboard to the computer. Otherwise, you may inadvertently activate
applications or scramble an attached computer's desktop icons when you clean the screen.
Don't use low-odor dry-erase markers such as EXPO2®, because the ink can be very difficult to remove.
Use only in well-ventilated areas.
Erase dry-erase ink as soon as possible after use. The longer dry-erase ink is on the surface, the more
difficult it is to remove.
Remove excess dry-erase dust with a damp lint-free cloth before using a cleaner.
If erasing doesn't completely remove dry-erase ink, clean the writing surface with a household glass cleaner
(such as Windex®) daily, weekly or as required.
Use dry-erase marker cleaner if ink remains after erasing.
99-00850-21 B0
Maintaining Your 600i2 Interactive Whiteboard System
(document
1414). With
31

Advertisement

Table of Contents
loading

Table of Contents