Nixeus NX-VUE30 User Manual page 8

If you want to adjust the horizontal placement of the OSD MENU on your monitor;
1) Press the DOWN or the UP button to navigate and highlight OSD H. POS then press MENU to highlight the progress
bar.
2) Use the VOL+ and VOL- buttons to adjust the value for your desired settings. Once you have customized your
selection, press the MENU or AUTO button.
The same steps can also be performed to adjust the vertical placement of the OSD MENU by navigating to the OSD V.
POS and adjusting the progress bar.
The default duration of the OSD MENU before it automatically disappears is 10 seconds.
1) To adjust this setting, in the OSD SETTING sub menu, use the UP or DOWN button to scroll down to OSD TIMER
and press menu to highlight the progress bar.
2) Then use the VOL+ or VOL- buttons to adjust the time for the OSD MENU. If you choose 60 seconds, but you don't
need that much time, you don't have to wait for the OSD to automatically disappear. You can always just press the AUTO
button to make the OSD menu disappear after you are finished with making adjustments.