Nixeus NX-VUE30 User Manual page 12

Dynamic Contrast Ratio (DCR) can also be adjusted in the BRIGHTNESS Sub-MENU.
1) Use the UP/DOWN buttons to navigate to DCR and press the MENU button.
2) Using the VOL+/VOL- buttons you can turn DCR to ON or OFF. Pressing the AUTO button will exit DCR.
Please note if DCR is turned ON, you cannot adjust the BRIGHTNESS and CONTRAST settings. You must adjust your
BRIGHTNESS and CONTRAST settings prior to turning ON DCR.
NOTE: For professional calibration, DCR must always be set to OFF and the ECO settings must be set to STANDARD to
allow access or adjustments to BRIGHTNESS and CONTRAST settings in the BRIGHTNESS Sub-Menu.
3) Once you are finished with your adjustments in the BRIGHTNESS Sub-Menu, press AUTO twice to exit out of the
OSD.