Adding Users To Cisco Unified Communications Manager - Cisco ATA 190 Administration Manual

Adding Users to Cisco Unified Communications Manager

Table 4-3
Parameter
Input Audio Level
IVR Password
Offhook Validation Timer
(50 ms to 1000 ms)
Onhook Delay Timer
(0 s to 155 s)
Onhook Validation Timer
Output Audio Level
Adding Users to Cisco Unified Communications Manager
Adding users to Cisco Unified Communications Manager allows you to display and maintain
information about users and allows each user to perform these tasks:
•
•
•
•
You can add users to Cisco Unified Communications Manager using either of these methods:
•
Cisco ATA 190 Analog Telephone Adaptor Administration Guide for SIP (Version 1.0)
4-6
Configuration Parameters for the ATA 190 (continued)
Access the corporate directory and other customized directories from an ATA 190.
Create a personal directory.
Set up speed dial and call forwarding numbers.
Subscribe to services that are accessible from an ATA 190.
To add users individually, choose User Management > End User from
Cisco Unified Communications Manager Administration.
Refer to Cisco Unified Communications Manager Administration Guide for more information about
adding users. Refer to Cisco Unified Communications Manager System Guide for details about user
information.
Description
Gain value of Network–to–Phone
ATA 190 IVR password
Offhook Validation Timer
Indicates the time to validate an offhook event
On-hook Delay Timer
Indicates the time to delay an onhook event
This parameter is reserved but does take effect now.
Note
Onhook Validation Timer
Indicates time to validate an onhook event
Gain value of Phone–to–Network
Chapter 4 Configuring the ATA 190
OL-31821-01