Language; Network Configuration - LaCie Network Space User Manual

LaCie Network Space
user Manual
4.2.4.

Language

To modify the LaCie Network Space admin page
language:
1. Click the oval button corresponding to "Language" on the
Configuration page.
2. On the "Select Language" page (Fig. 4.2.4), select a lan-
guage from the dropdown menu.
3. Click Apply.
4.2.5.

Network Configuration

If your LaCie Network Space is connected to a hub or switch that
is not a DHCP server you can make network settings manually.
ImpOrTANT INfO: Do not make changes to the settings
on the Ethernet controller page if you are not familiar with their
meanings. If the fields on the Ethernet controller page are filled
when the "Obtain configuration from DHCP server" button is
selected, you do not need to make changes.
To change network settings:
1. Click the oval button corresponding to Network Configura-
tion on the Configuration page.
2. Click Edit.
3. Click the Configure Manually button and make changes
according to the configuration of your network.
4. Click Apply.
TeChNICAl NOTe: Changing the IP address will cause the
language setting to revert to the default (English).
• deSigN by NeiL pouLtoN
Figure 4.2.4
Figure 4.2.5
Administration
page 22