Configuring The Lacie Network Space On A Network Without A Dhcp Server - LaCie Network Space User Manual

LaCie Network Space
user Manual
2.4. Configuring the LaCie Net-
work Space on a Network
Without a DHCP Server
Most home networking routers are DHCP servers, meaning the
router assigns an IP address to all devices on the network to
allow devices to find each other. If your network does not have
DHCP server, you may need to manually assign your LaCie Net-
work Space an IP address and other network information.
The easiest way to modify your LaCie Network Space's network
configuration is to use the LaCie Ethernet Agent. See section
Connect with LaCie Ethernet Agent
the network configuration software.
1. Start LaCie Ethernet Agent (see section
LaCie Ethernet Agent).
2. Windows Users: Click on the LaCie Ethernet Agent icon in
the system tray and select Configuration Window... (Fig.
2.4-A). The LaCie Ethernet Agent Configuration window
opens (Fig. 2.4-B).
Mac users: Click on the LaCie Ethernet Agent icon in the
menu bar and select Network Configuration... (Fig. 2.4-C).
The LaCie Ethernet Agent Configuration window opens (Fig.
2.4-B).
Click the Network tab.
3.
4. Select Manual.
TeChNICAl NOTe: If the fields (IP address, Subnet mask,
etc.) are filled when Automatic (DHCP) is selected, you do not
need to make manual settings. Leave Automatic selected.
5. Modify the network settings to work with your network.
6. Click Apply.
• deSigN by NeiL pouLtoN
2.3.
for information on installing
2.3. Connect with
Fig. 2.4-A
Fig. 2.4-B
Fig. 2.4-B
Setup
page 13