Basic Operation - Teac SR-2DAB Owner's Manual

1
Press the STANDBY/ON button to turn the unit
on.
< The unit turns on with the source that was last
selected.
< If an iPod/iPhone that is in playback mode is inserted
into the Dock, the SR-2DAB will automatically turn on
and start iPod/iPhone playback.
2
Press the FUNCTION button to select a source.
< To listen to an external source connected to the AUX
IN jack, select AUX.
< If you select "iPod" when no iPod/iPhone is docked,
the iPod indicator on the display blinks.
3
Play the source, and adjust the volume using
the VOLUME knob.
The volume can be adjusted from MIN (0) to MAX (40).
12

Basic Operation

Dimmer
You can change the brightness of the front panel display
and buttons.
Use the DIMMER button to set the brightness to one of
three levels or turn the light off.
This function works even if the unit is in standby.
< Setting is ended if the STANDBY/ON button is pressed.
Muting
You can mute the sound temporarily.
To mute the sound, press the MUTING button.
Press the MUTING button again to unmute the sound.
< "MUTING" appears on the display while muting is
engaged.
< If you change the volume or source when the sound is
muted, it will be unmuted.