Basic Operation - Teac SL-D900BT Owner's Manual

3 1
1
Press the STANDBY/ON button to turn the
unit on.
o Even when in standby (unit off ), pressing a func-
tion button will turn the unit on.
2
Press a function button to set the playback
source.
When a playback source is selected, the correspond-
ing indicator lights.
o When using the remote control, press the
FUNCTION button repeatedly until the indicator for
the desired audio source lights.
3
Turn the VOLUME knob to adjust the volume.
00 (MIN): minimum volume (no sound)
36 (MAX): maximum volume
Turn the VOLUME knob right to raise the volume and
left to lower it.
16

Basic operation

2
o The default value is 12.
o When you turn the VOLUME knob, the volume will
be shown for about three seconds.
V Sudden loud noises could damage your
hearing or cause other harm. Set the volume
to minimum. After sound output begins,
adjust the volume to a suitable level.
NOTE
When not using this unit, press the STANDBY/ON but-
ton to put the unit into standby.
Changing the tone
1
Press the TONE button
In the middle of the display "tone" will appear and the
"b" above it will blink.
2
Use the MULTI JOG buttons to set the low
frequency value.
o The default setting is 0 for both the low-frequency
and high-frequency bands. They can be set
between −5 and 5.