Basic Operation - Teac SL-D920 Owner's Manual

1
Press the STANDBY/ON switch to turn the unit
on.
2
Press the FUNCTION button to select a source.
3
Play the source and adjust the volume using the
VOLUME knob.
Muting
To mute the sound temporarily, press the MUTING
button. Press the MUTING button again or adjust the
volume to restore the sound.
< While muting is activated, the MUTING indicator
lights up.
< When the FUNCTION button is pressed, muting will
be cancelled.
14

Basic Operation

2
3 1
Dimmer
You can change the brightness of the front panel
display.
Push the SNOOZE button to darken the display.
Push it again to restore regular brightness.
This function also works in standby mode.
Sleep Timer
Each press of the SLEEP button changes the amount
of time (between 15 and 90 minutes) until the unit
automatically switches to Standby mode.
Press the SLEEP button to cycle through the time
options as shown in the following illustration.
15 30
< To check the remaining time, press the SLEEP button
once.
< While the sleep timer is activated the display is
dimmed.
45 60 90
Off