Basic Operation - Teac SR80iDABp Owner's Manual

This chapter describes the basic operation which is
available in every sound source.
1
Press the Standby/On (¤ ) button to turn the
unit on.
< The unit turns on with the source that was last
selected.
If the BAND button is pressed the unit will turn on
and DAB or FM will be selected.
2
Press the FUNCTION button to select a source.
Each time the FUNCTION button is pressed, the
sound source changes as follows:
iPod(or iPhone)
DAB
FM
USB
AUX
(External source)
o To listen to an external component connected to the
AUDIO jacks, select "AUX".
o You can also use the BAND button to select directly
"DAB" or "FM".

Basic Operation (1)

3
Dimmer
Press the DIMMER button to dim the display light.
Press the DIMMER button again to restore the display to
its normal brightness.
o This function will be cancelled when the STANDBY/ON
(¤) button is pressed.
Muting
You can mute the sound temporarily.
Press the MUTING button.
Press the MUTING button again to restore the sound.
o "Muting" lights on the display while muting is engaged.
o If you change the volume level or sound source when
the sound is muted, muting is cancelled.
Play the source, and adjust the volume using
the VOLUME ( + / – ) buttons.
The volume can be adjusted from MIN (0) to MAX
(40).
13