Jacuzzi ProTech Owner's Manual page 32

To ensure optimum performance, clean and reuse both cartridges once a
month. ALWAYS TURN POWER TO SPA OFF BEFORE CLEANING THE
FILTER CARTRIDGES! Refer to the filter cleaning/replacement procedure
below:
A
B
filter cover
handles
(Inside Spa View)
Lift upward on filter cover handles to
unsnap and remove it from mating
retainer clips.
E
top
top
Cartridge 1
Cartridge 2
Rinse debris from filter pleats on
each cartridge using a garden hose
and high-pressure nozzle. Start at
top and work downward to handle.
Repeat until all pleats are clean.
*
Note: to maximize filter life, switch filter cartridge positions at each cleaning. The circulation pump's filter wall
fitting is easily identified by it's mesh grill.
Page 28
TURN POWER TO SPA OFF!
C
(Inside Spa View)
Rotate each filter cartridge handle
counterclockwise to unthread from
mating wall fitting.
F
(Inside Spa View)
Place each cartridge back into
*
skimmer well , then rotate each
cartridge handle clockwise to
thread back into wall fitting. DO
NOT OVERTIGHTEN!
D
handle
Skimmer Well
Remove both cartridges from
skimmer well.
G
(Inside Spa View)
1. Install filter cover by sliding it
down into position over mating
retainer clips.
2. Turn power to spa back on.