Setting The Clock - Teac SR-80iDAB Owner's Manual

Set the clock when you connect the power cord into the
wall socket and turn on the unit for the first time.
1
If the unit is on, press the STANDBY/ON (¤ )
button to turn it off.
2
Press and hold the CLOCK ADJ button for more
than 3 seconds.
"12 H" or "24 H" blinks. If you want to change the hour
mode, press the Skip (.//) button.
o If no button is pressed for more than 10 seconds, the
clock setting will end automatically.
3
Press the CLOCK ADJ button again.
The hour value "00" blinks.
4
Press the Skip ( . / / ) button repeatedly to
set the current hour, then press the CLOCK ADJ
button.
The minute value "00" blinks.
12

Setting the Clock

5
Repeat step
and "day".
After "day" is set, the clock starts from 00 seconds.
Example:
Displaying the clock
When the source is "USB", "DAB" or "FM", press the
TIME button to display the clock for 5 seconds.
to set "minute", "year", "month"
4