Setting The Clock - Teac SR-L230I-B Owner's Manual

CLOCK ADJ
< You cannot set the clock when the source is
"TUNER".
1
Press the CLOCK ADJ button to display the
clock.
2 Press the CLOCK ADJ button again.
"12 HR" or "24 HR" blinks on the display. If you
want to change the hour mode, press the . or
/ button.
< When no button is pressed for 8 seconds, the timer
setting mode will be cancelled.
3
Press the CLOCK ADJ button again.
The "hour" value blinks.
12

Setting the Clock

/
4
Press the skip button (.//) to set the
current hour.
5
Press the CLOCK ADJ button.
The "minute" value blinks.
6 Press the skip button (.//) to set the
current minute.
7 Press the CLOCK ADJ button.
The clock starts.