Exit - Belkin F1DN001R User Manual

CONFIGURATION
SECTIONS
Table of Contents
5. Scroll to Create configuration file and press select button or Enter
on the keyboard.
Save Configuration
Create configuration file

Exit...

6. In the field that opens, type a configuration name up to 18 characters
long.
Save Configuration
Create configuration file
Exit...
Configuration file name
4PortSecure
Belkin ® Secure Desktop Controller Unit (DCU) User Manual
1 2
F1DN003R
F1DN003R
29
3 4
7. On the keyboard, press Enter.
• If the configuration file saves successfully, then a confirmation
message appears:
– Completed successfully
– Saved file: 4PortSecure
8. Scroll to Exit... and press the Select (
Setup menu.
Note: The saved configuration can be loaded only on Secure KVMs
that are compatible and have the same number of ports.
Exit
Exiting the Belkin Secure DCU's Setup menu applies the new settings
to the Secure DCU.
Note: If you do not want to apply the new settings, save the new
configuration, as described in Save Configuration on page 28.
To exit the Setup menu, scroll down to Exit and press Select or 2.
5 6 7
) or 2 button to return to the
BACK TO TABLE OF CONTENTS >