Channel Selection On F1Dn001R And F1Dn002R; Channel Selection On F1Dn003R - Belkin F1DN001R User Manual

OPERATION
SECTIONS
Table of Contents

Channel selection on F1DN001R and F1DN002R

• The default display after Belkin Secure DCU and KVM power up
indicate channel #1 as the active channel.
• On the front panel of the Secure DCU, press the channel button
corresponding to the desired computer.

Channel selection on F1DN003R

Select which computer to control using the Belkin Secure DCU:
• The default display after Belkin Secure DCU and KVM power up
indicate channel #1 as the active channel.
Channel
1 Internet
2 Secure AF
3 Classified ERP
4 Navy OP
Belkin ® Secure Desktop Controller Unit (DCU) User Manual
1 2
CAC
CAC
F1DN003R
3 4
• Press the up or down push buttons to move the arrow to another
channel.
Channel
1 Internet
2 Secure AF
3 Classified ERP
4 Navy OP
• Press the center (Select) button (
The new channel is highlighted.
Channel
1 Internet
2 Secure AF
3 Classified ERP
4 Navy OP
• The user may also use keyboard shortcuts to switch channels.
Type Ctrl, Ctrl, <channel number> to switch the KVM to another
channel.
For example: Type Ctrl, Ctrl, 4 to change to channel 4.
16
5 6 7
CAC
CAC
F1DN003R
) to activate the new channel.
CAC
CAC
F1DN003R
BACK TO TABLE OF CONTENTS >