Table of Contents
Advertisement
INSTALLATION
SECTIONS
Table of Contents
Before Installation
Unpacking the Product
Before opening the product packaging, inspect the packaging's seals,
to assure that the packaging was not opened or tampered during
shipping. If the packaging's seals look suspicious, do not use the
product and contact Belkin support.
After opening the packaging, inspect the package contents to verify
all required components are included. See packaging contents list on
page 1.
After removing the Belkin Secure DCU from its packaging materials,
inspect the tamper-evident label, to assure that it is properly sealed and
was not tampered. Do not use that product if the label is damaged or
missing, and contact Belkin support.
Where to place the Belkin Secure DCU?
The Belkin Secure DCU is designed to be placed on a desktop, near the
display, mouse and keyboard that the user will use to control the Secure
KVM. Locate the Belkin Secure DCU in the user's primary field of view
while working with the display, since Secure KVM channel selection and
continuous status monitoring is required from a security standpoint.
Typical location is on the user's desktop to the lower right of the display
for right-handed users, or to the lower left for left-handed users.
The product may be fixed to a rack or table using Velcro
necessary.
Belkin
®
Secure Desktop Controller Unit (DCU) User Manual
1
2
3
Avoid direct sunlight or strong light source reflections on the Belkin
Secure DCU display, to prevent eye fatigue to the user.
The Secure DCU must be located in a secure and well-protected
environment, to prevent potential access by attackers.
Consider the following when deciding where to place the Belkin Secure
DCU:
Note: Connect the DCU directly to the KVM. Do not connect switches
or other devices between them.
Note: Use the following cables to connect the Belkin Secure DCU to
the Secure KVM:
pads, if
®
– Up to 6 ft. (1.9 m): F1D9026-06
– From 6 ft. (1.9 m) to 50 ft. (15 m): F1D9026-50
12
4
5
• User must have easy access to the push-buttons on the Belkin
Secure DCU.
• Distance: Cables from the Secure DCU to the Secure KVM may
extend up to 50 feet.
• User's keyboard, mouse and CAC device must connect directly
to the Secure KVM
• The Belkin Secure DCU must be in the user's primary field of view.
6
7
BACK TO TABLE OF CONTENTS >
Advertisement
Table of Contents
Troubleshooting
