CONFIGURATION
SECTIONS
Table of Contents
Administrator Configuration
These instructions are intended for administrators. Regular users are not
allowed to access the Setup menu and should not modify device settings.
Only the following Setup options are accessible to a regular user:
• Messages
• System Information
• Channel visibility
• Display backlight
Note: The following items are required to perform all configuration
options.
– USB keyboard
– Unlock SD card
– USB to Mini-USB adapter cable
The Mini-USB adapter and Unlock SD card are sold separately, as
part of the Secure Desktop Controller Administrator Kit.
See To connect keyboard and Unlock SD card on page 21.
Enter setup mode:
Note: When configuring the Secure DCU, the Secure KVM is disabled,
including front-panel push-buttons. No display, keyboard, mouse or
audio output is available.
Note: F1DN001R cannot be configured.
Belkin
®
Secure Desktop Controller Unit (DCU) User Manual
1
2
(F1DN002R and F1DN003R Only)
3
4
F1DN002R:
• Press buttons 2 and 3 at the same time for five seconds
• Press 1 to scroll up or 4 to scroll down
• Press 2 to select the item
F1DN003R:
• Push + hold the central button
• Use the up or down buttons and select setup
• Press central button to select
Setup
Messages
System Information
Cusomize Channels
Display Backlight
Load Configuration
Save Configuration
Exit
• Scroll with the up or down arrow buttons to the desired option and
press the center Select button (
• To exit, scroll down to Exit and press the Select button (
19
5
6
7
F1DN003R
).
BACK TO TABLE OF CONTENTS >
).