Table of Contents
Advertisement
This machine will perform many types of operations
that are beyond the scope of this manual. Many of these
operations can be dangerous or deadly if performed
incorrectly.
The instructions in this section are written with the
understanding that the operator has the necessary
knowledge and skills to operate this machine.
If you are an inexperienced operator, we strongly
recommend that you read books or trade articles, or
seek training from an experienced
before performing any unfamiliar operations.
Before making cuts to the workpiece, it is important
that all safety precautions and bandsaw adjustments are
addressed.
Select and install the required blade (refer to
on
Select the required cutting speed (refer to
on
).
Raise and lock the headstock, so the blade is
approximately 3" from the workpiece, and open the
vise to accept the workpiece.
Note: NEVER let the saw blade rest on the workpiece
without the saw running. Otherwise, you will
permanently damage the saw blade!
Insert the workpiece into the vise, so the blade
will contact the flattest part of the workpiece
first, and clamp the workpiece in the vise.
operator
).
-21-
Advertisement
Table of Contents
