Whirlpool YGS395LEG Use & Care Manual page 26

USING THE SELF-CLEANING CYCLE
S
ETTING THE CONTROLS
To delay the start using delay start time:
1.
Press AUTO CLEAN.
This will automatically set a 3
Cleaning cycle.
NOTE: There will be a 30-minute cool-down
1 ⁄ hour before the cycle is over.
2
2.
Set the cleaning time (optional).
If you want a Self-Cleaning cycle longer or
shorter than 3 1 ⁄
pads to set the cleaning time you want. Press
the "up" (s) or "down" (t) pad(s) until a time
between 2 1 ⁄ -4 1
2
•
Use 2 1 ⁄ hours for light soil.
2
•
Use 3 1 ⁄ -4 1 ⁄ hours for average to heavy soil.
2 2
3.
Press DELAY START TIME.
4.
Set the start time.
Press the "up" (s) or "down" (t) pad(s) until the
correct time shows on the display. The oven will
automatically come up with the stop time by
adding the set cleaning time to the set start
time.
5.
Press START/ENTER.
The door will lock as soon as you press
START/ENTER.
6.
After the Self-Cleaning cycle starts:
7.
After the Self-Cleaning cycle ends:
LOCKED goes off and the door unlocks.
NOTE: The stop time will be the start time plus
the cleaning time.
26
.
( CONT
⁄ -hour Self-
1
2
hours, use the Hour and Minute
2
⁄ hours shows on the display.
2
)
PRESS
AUTO
CLEAN
PRESS
HR MIN
PRESS
DELAY
START
TIME
PRESS
HR MIN
PRESS
START
ENTER
5 SEC
YOU SEE
YOU SEE
(example for 4 1 ⁄ -hour cycle)
2
YOU SEE
START
YOU SEE
START
(example for 2:30 start time)
YOU SEE
ON
DELAY
YOU SEE
HEAT
ON
LOCKED
TIME D
YOU SEE
CLEAN
TIME
CLEAN
TIME
CLEAN
TIME
CLEAN
TIME
CLEAN
CLEAN
TIME
CLEAN