Error Codes - Whirlpool ADP8000 Instruction Manual

WARNING!
The dishes were not
loaded correctly.
The programme was
not adequate.
Not enough detergent
was dispensed.
Items are blocking
the path of sp ay arms. r
The filter combination
in the base of wash
cabinet is not clean or
is not correctly fitted.
This may cause
the sp ay arm jets r
to get blocked.
Combination of soft
water and too much
detergent.
Aluminum utensils
have rubbed against
dishes.
Dishes block the cover of
detergent dispenser.
Improper loading
Too little rinse-aid
Dishes are removed
too soon
Wrong program
has been selected
Use of cutlery with
a low-quality coating
Longer inlet time.
Overflow.
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak,
the water should be removed before restarting the dishwasher.
See notes in " Loading the Dishwasher ".
Select a more intensive programme.
See" Wash Cycle Table . "
Use more detergent, or change your detergent.
Rearrange the items so that the sp ay can rotate freely.
Clean and/or fit the filter combination correctly.
Clean the sp ay arm jets. See "Cleaning the Spray r
Arms".
Use less detergent if you have soft water and select
a shortest cycle to wash the glassware and to get
them clean.
Use a mild abrasive cleaner to eliminate those marks.
Re-loading the dishes properly.
Load the dishwasher as suggested in the directions.
Increase the amount of rinse-aid/refill the rinse-aid
dispenser.
Do not empty your dishwasher immediately after
washing. Open the door slightly so that the steam can
escape. Begin unloading the dishwasher only once the
dishes are barely warm to the touch. Empty the low
basket first. This prevents water form dropping off
dishes in the upper basket.
In short programs the washing temperature is lower,
which affects the drying performance. Choose a
program with a longer washing time.
Water drainage is more difficult with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
Faucets is not opened, or water intake is restricted,
or water pressure is too low.
Some element of dishwasher leaks .
18
r