Read These Notes First; Choosing A Site For The Base Unit And Charger Pod; Radio Signals Between Handset And Base Unit; Mains Power Connection - iDect X2i System User Manual

Color profile: Disabled
Composite Default screen

Read these notes first

Choosing a site The base unit and charger pod(s) should be placed on a
for the base level surface, in a position where:
unit and
■
the mains adapter plug will reach an easily accessible
charger pod
230-V switched mains supply socket — never try
AC
to lengthen the mains power cable
■ the base unit's telephone line cable will reach your
telephone line socket or extension socket (the charger
pod does not have a telephone line connection)
■ it is not close to another telephone — this can cause
radio interference
■ it is not close to a sink, bath or shower, or anywhere
else where it might get wet
■ it is not close to other electrical equipment — fridges,
washing machines, microwave ovens, fluorescent
lights, TVs etc.
Radio signals To use your handset and base unit together, you must
between be able to establish a radio link between them. Be
handset and aware that:
base unit
■ Any large metal object — like a refrigerator, a mirror
or a filing cabinet — between the handset and the
base unit may block the radio signal.
■ Other solid structures, like walls, may reduce the
signal strength.
Mains power IMPORTANT — The iDECT X2i base unit and charger
connection pod must be used with the mains adapter supplied with
the unit. Using any other adapter will result in non-
compliance with EN60950, and will invalidate any
approval given to this apparatus.
Make sure mains power to the base unit stays switched
!
on. The iDECT X2i needs electrical power for normal
operation; not just for charging the batteries.
4