Using A Multi-Handset System; To Make An Intercom Call; To End An Intercom Call - iDect X2i System User Manual

Color profile: Disabled
Composite Default screen

Using a multi-handset system

If you have an iDECT X2i multi-handset system, you
already have more than one handset registered to your
base unit. You can register additional handsets — up to
four per base unit. With two or more handsets, you
can:
■ make intercom calls from one handset to another
■ transfer an outside call from one handset to another
■ shuttle between an outside call and an intercom call
■ set up a three-way conference call
Each handset's number (1 to 4) is shown on its display.
Only one handset can be connected to the outside
!
line at once. If you try to make a call while another
handset is already on the line, you'll hear Busy tone.
To make an 1 Press and hold the INT/# button for 2
intercom call seconds.
è
The INT symbol flashes on the display and
the numbers of the available handsets will be
displayed
INTERCOM 2
2
Press the appropriate number to select and
call the handset
è
The other handset rings, and its display
shows Call From Handset #
number). When the other handset user
answers, you'll be connected.
◗
To end an On either phone, press the HANG UP button
intercom call or replace the unit in the base unit or
charger pod
Help Line: 0845 345 9677
(Local Call rate)
3 4
(with your handset
25