Remote Operation; To Activate Remote Control - iDect X2i System User Manual

Remote operation

The X2i will allow you to check your messages remotely
from another phone. To use this function you must call
using a tone dialling telephone and you will need to
enter your X2i's master PIN.
The remote control function must be activated before it
can be used, and will not function unless the master PIN
has been changed from the default (see page 45).
Press the MENU/OK button ONCE then á
To activate 1
remote
ONCE
control:
è
Display Shows
Press the MENU/OK button ONCE then á
2
ONCE
è
Display Shows
Press the MENU/OK button ONCE then á
3
TWICE
è
Display Shows
4
Press the MENU/OK button
è
Display Shows
Press the â button to select between
5
Activated and Deactivated
è
Display Shows
6 Press the MENU/OK button to confirm the
selection
è
You will hear a confirmation beep
7
Use the CANCEL button to exit the menu or
press and hold HANG UP to go to standby
mode
Help Line: 0845 345 9677
(Local Call rate)
Remote operation
Main Menu >Ans Machine
Ans. Machine >Settings
Ans Settings >Remote Access
Remote Access >Deactivated
Remote Access >Activated
37