Table of Contents
Advertisement
Color profile: Disabled
Composite
Default screen
Read these notes first
Choosing a site
The base unit and charger pod(s) should be placed on a
for the base
level surface, in a position where:
unit and
■
the mains adapter plug will reach an easily accessible
charger pod
230-V
switched mains supply socket — never try
AC
to lengthen the mains power cable
■
the base unit's telephone line cable will reach your
telephone line socket or extension socket (the charger
pod does not have a telephone line connection)
■
it is not close to another telephone — this can cause
radio interference
■
it is not close to a sink, bath or shower, or anywhere
else where it might get wet
■
it is not close to other electrical equipment — fridges,
washing machines, microwave ovens, fluorescent
lights, TVs etc.
Radio signals
To use your handset and base unit together, you must
between
be able to establish a radio link between them. Be
handset and
aware that:
base unit
■
Any large metal object — like a refrigerator, a mirror
or a filing cabinet — between the handset and the
base unit may block the radio signal.
■
Other solid structures, like walls, may reduce the
signal strength.
Mains power
IMPORTANT — The iDECT X2 base unit and charger
connection
pod must be used with the mains adapter supplied with
the unit. Using any other adapter will result in non-
compliance with EN60950, and will invalidate any
approval given to this apparatus.
Make sure mains power to the base unit stays switched
!
on. The iDECT X2 needs electrical power for normal
operation; not just for charging the batteries.
4
Advertisement
Table of Contents
