Registering new handsets
Registering new handsets
The handset(s) supplied with your iDECT X2i base unit
are already registered to it, so you don't need to
register them. But if you've bought extra handsets
separately, you'll need to register them. Each iDECT X2i
base unit can be registered to up to four handsets.
To register a
Make sure the handset you're registering is in
new handset
standby mode.
1
Press the MENU/OK button
è
Display shows
Press the â button THREE times
2
è
Display shows
3
Press the MENU/OK button
è
Display shows
Press the â button TWICE
4
è
Display shows
5
Press the MENU/OK button
è
The display shows
The PIN is 0000 unless you've set a new one
(see page ).
6
Key in the PIN and press the MENU/OK
button
è
The display shows
7
Immediately press the HANDSET LOCATOR
button on the base unit and hold it until you
hear a tone
è
If the base is found and the PIN is correct you
will hear a long confirmation beep. The handset
is automatically given the lowest free handset
number.
56
Main Menu >Phonebook
Main Menu >Advanced Set
Advanced Set >Recall Time
Advance Set >Registration
Enter PIN.
Registering
Need help?
Do you have a question about the X2i System and is the answer not in the manual?