New Call Tone; To Page All Handsets From The Base Unit - iDect X2i System User Manual

Color profile: Disabled
Composite Default screen
Using a multi-handset system

New Call tone

When you are on an intercom call and an
outside call comes in, you'll hear New Call
tone to tell you that someone is calling you.
To answer the outside call and end the
intercom call:
◗
Press the PHONE button briefly
OR, to answer the outside call and put the
intercom call on hold (so you can later use
shuttle, conference or transfer):
◗
Press the INT/# button for one second
If you now want to set up a three-way
conference, simply press and hold the INT/#
button for one second.
To page all To make all registered handsets ring (this is
handsets useful if you've forgotten where you put a
from the handset):
base unit
1
Press the HANDSET LOCATOR button on
the base unit
è
The handsets ring for up to 20 seconds and
their displays show
To stop the ringing before 20 seconds:
◗
EITHER press the HANDSET
LOCATOR button again
◗
OR press any button (except HANG UP) on
any handset
28
.
<Paging>