New Call Tone; To Page All Handsets From The Base Unit; To Select A Base Unit - iDect K1 User Manual

Using a multi-handset system

New Call tone

When you are on an intercom call and an
outside call comes in, you'll hear New Call
tone to tell you that someone is calling you.
To answer the outside call and end the
intercom call:
◗
Press the right Soft button [
OR press
è
Handset rings
◗
Press the button to answer.
To page all To make all registered handsets ring (this is
handsets useful if you've forgotten where you put a
from the handset):
base unit
◗
Press the HANDSET LOCATOR button
on the base unit
è
Handsets ring for up to 30 seconds and their
displays show [ Paging
To stop the ringing before 30 seconds:
◗
EITHER press the HANDSET LOCATOR
button again
◗
OR press
32
]
Back
to end the intercom call.
]
on any handset
To select If your handset is registered to more than one
a base unit base unit, it will automatically select the one with
which can best set up a radio link (usually the
nearest one). Or you can select a base unit manually.
You don't need this function if you have only one
base unit.
1
Press the Menu
2
Press to go to the [
then press OK
3
Press or to select [
then press OK
è
The display shows [
4 Key number 0 for Auto, 1 or 2 to select
the base you want
5
Press the left soft button
Help Line: 0845 345 9677
(Local Call rate)
Using a multi-handset system
button
Handset Set ]
Select Base ]
]
Base
[ ]
Auto 1 2 ...
OK
33