Honda CR125R 2006 Owner's Manual page 54

Cylinder System
Cylinder Removal
1. Remove the expansion chamber (page 75).
2. Remove the bolts (1), exhaust pipe joint (2)
and gasket.
(1)
(1) bolts (2) exhaust pipe joint
3. Remove the bolts (3), screw (4), right RC
cover (5), gasket and grommet (6).
4. Remove the B-clip (7) and setting collar (8),
then remove the valve rod (9) from the RC
valve arm.
NOTICE
Be careful not to drop the B-clip and collar into
the right crankcase.
(3)
(5)
(4)
(6)
(3) bolts (7) B-clip
(4) screw (8) setting collar
(5) right RC cover (9) valve rod
(6) grommet
50
Servicing Your Honda
5. Remove the bolts (10) and clamp (11).
6. Remove the left RC cover (12) and gasket.
(11)
(2)
(10)
(10) bolts
(11) clamp
7. Loosen the radiator hose clamp screw (13)
and disconnect the radiator hose (14).
8. Remove the radiator shrouds (15) on both
sides.
9. Loosen the upper mounting bolts (16) on
both sides.
10. Remove the lower mounting bolts (17), then
swing the radiator grills (18) forward on both
sides.
(13)
(8)
(7)
(9)
(13) screw
(14) radiator hose
(15) radiator shroud
(12)
(12) left RC cover
(16)
(18)
(15)
(17)
(14)
(16) upper mounting bolt
(17) lower mounting bolt
(18) radiator grill
11. Remove the cylinder (19) by removing the
four flange nuts (20).
(19)
(20)
(19) cylinder (20) flange nuts
12. Remove the gasket (21) and dowel pins (22).
(22)
(21)
(21) gasket (22) dowel pins