Honda CR125R 2006 Owner's Manual page 63

Reed Valve Installation
1. Install the reed valve inner (1) into the reed
valve assembly (2) while aligning the cut-outs
(3).
(3)
(1) reed valve inner (3) cut-outs
(2) reed valve assembly
2. Install the new gasket to the crankcase.
3. Install the reed valve assembly and insulator
(4) to the crankcase.
4. Install the six carburetor insulator mounting
bolts (5) and tighten to the specified torque in
a crisscross pattern:
7 lbf·ft (10 N·m, 1.0 kgf·m)
(2) After installation, check for secondary air leaks
around the reed cage and insulator.
(1)
(4)
(4) insulator
(5) carburetor insulator mounting bolts
5. Install the carburetor (page 104).
(5)
Reed Valve
59
Servicing Your Honda