Honda CR125R 2006 Owner's Manual page 72

Motocross motorcycle
Table of Contents

Advertisement

Brakes
Brake Pad Wear
Brake pad wear depends on the severity of usage
and track conditions. (Generally, the pads will
wear faster on wet and dirty tracks) Inspect the
pads at each regular maintenance interval (page
21).
Front Brake Pads
Inspect the pads (1) through the front wheel to
determine the pad wear. If either pad is worn
anywhere to a thickness of 0.04 in (1 mm), both
pads must be replaced.
minimum thickness
indicator
(3)
(2)
wear indicator
grooves
(1) brake pads
(3) brake disc
(2) front brake caliper
68
Servicing Your Honda
Rear Brake Pads
Inspect the pads (4) from the rear side of the
caliper to determine the pad wear. If either pad
is worn anywhere to a thickness of 0.04 in
(1 mm), both pads must be replaced.
(4)
(6)
0.04 in
(1 mm)
(4) brake pads
(5) rear brake caliper
(1)
replace
0.04 in
(1 mm)
(1)
replace
Check that the front lever and rear pedal
assemblies are positioned properly and the
securing bolts are tight.
(5)
minimum thickness
Make sure there are no fluid leaks. Check for
indicator
0.04 in
deterioration or cracks in the hoses and fittings.
(1 mm)
(4)
replace
(6) brake disc
Other Inspections

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2007 cr125rCr 125r

Table of Contents