Renkus-Heinz ICL-R User Manual page 58

IC Live Users Manual - Models ICL-R & IC215S-R
IC215S-R Technical Specifications
Note: All analog inputs and outputs comply with AES Standard 45-2005 on interconnecting,grounding and shielding.
Sensitivity:
1.4 V (for rated power output)
Freq. Range:
43 Hz to 100 Hz
Max SPL:
133 dB program, 136 dB peak,
№. Transducers:
Two model SSL15-14, 15" cone woofers, 800 Watts
program at 4 Ohms (each)
Dimensions:
44.5" H x 20" W x 24" D (113 cm x 50.8 cm x 61 cm)
Weight:
206 Lbs (93.4 Kg)
Hardware:
Aeroquip Flytrack, Handles, Casters
Enclosure:
Finnish Birch, perforated steel grille
Inputs:
Analog Audio Input 1: Looping XLR (female in, male out)
Analog Audio Input 2: Phoenix 6-pin (looping 3-in, 3-out)
CobraNet: Dual RJ45 connectors (for CAT 5 copper cable)
AES/EBU: Phoenix connector
Controls (Rear Mounted):
Power On/Off, Push-To-Reset circuit breakers
Mute button;
Up & Down Output Level push buttons;
10 dB Input pad (on Analog 1 input)
Computer Controls:
Gain, Mute, On/Standby, Input Selection
Compression,
8-Band Parametric EQ
Shelving & Rolloff Filters
Delay
Status Indicators:
Power, Signal, Overdrive, Thermal, Mute, Input Pad
Power Connector:
Powercon locking connector
Finish:
Black paint
Network Digital Format:
16, 20 or 24 bit PCM; 48 or 96 kHz sample rat;
Selectable network latency
PM-2LR AMPLIFIER
Type:
Class D amplifier/DSP processor
Power Rating:
2 x 850 Watts RMS, 950 W Program
THD Distortion:
< 0.05% typical
Hum & Noise
<100 dB (A weighted)
:Power Required:
90/136 V or 180/260 V AC, 50/60Hz.
13 Amps @ 120 V; 6.5 Amps at 240 V
Idle current; 380 ma @ 120 V; 190 ma @ 240 V
58