Turning On The Wireless Voice Gateway - THOMSON TWG850-4 User Manual

Chapter 1: Connections and Setup

Turning on the Wireless Voice Gateway

After installing the Wireless Voice Gateway and turn it on for the first time (and each time the modem is
reconnected to the power), it goes through several steps before it can be used. Each of these steps is
represented by a different pattern of flashing lights on the front of the modem.
Note: All indicators flash once before the initialization sequence.
If all of the lights are flashing sequentially, it means the Wireless Voice Gateway is automatically
updating its system software. Please wait for the lights to stop flashing. You cannot use your modem
during this time. Do not remove the power supply or reset the Wireless Voice Gateway during this
process.
22
Illustrations contained in this document are for representation only.