THOMSON TWG850-4 User Manual page 19

If you received an Installation/Quick Start kit with the purchase of your modem, you should use the
software provided in that kit. If not, the Wireless Voice Gateway CD included with your modem
contains the drivers and other information you need to install your Wireless Voice Gateway.
USB Connection
If you do not want to use the CD-ROM, follow instructions 1 through 5 to connect the Wireless Voice
Gateway to the USB port on your computer. Instructions must be followed in the order they appear.
1. Connect one end of the coaxial cable to the cable connection on the wall, and the other end to the
CABLE jack on the Wireless Voice Gateway.
2. Connect the plug from the AC power supply into the POWER AC ADAPTER jack on the Wireless
Voice Gateway and plug the power supply into an AC outlet.
3. Insert the supplied Wireless Voice Gateway CD-ROM. Wait momentarily for the CD window display.
4. Close all open applications and dialog boxes, including the CD window.
Note: Some applications may interfere with your Wireless Voice Gateway installation.
5. Connect one end of the USB cable to the USB port located on the back of your computer. Connect the
other end of the USB cable to the USB port on the Wireless Voice Gateway.
Note: Use only the power supply that accompanied this unit. Using other power supplies may damage
the unit.
Next, you need to install the USB driver for your operating system.
Illustrations contained in this document are for representation only.
Chapter 1: Connections and Setup
TWG850-4
12
Fig. 3