Table of Contents
Advertisement
Chapter 1: Connections and Setup
Turning on the Wireless Gateway
After installing the Wireless Gateway and turn it on for the first time (and each time the modem is
reconnected to the power), it goes through several steps before it can be used. Each of these steps is
represented by a different pattern of flashing lights on the front of the modem.
Note: All indicators flash once before the initialization sequence.
If all of the lights are flashing sequentially, it means the Wireless Gateway is automatically updating its
system software. Please wait for the lights to stop flashing. You cannot use your modem during this time.
Do not remove the power supply or reset the Wireless Gateway during this process.
13
Illustrations contained in this document are for representation only.
Advertisement
Table of Contents
