Test Sequences - Elation COLOR SPOT 150 User Manual

9.5 Test sequences

This function allows you to run a special demo-test sequences without an external controller, which will show you
some possibilities of using COLOR SPOT 150. Press [
sequences. The "Mod1" is suitable for projections on the wall, ceiling or ground without any head-movement, the
"Mod2" uses all COLOR SPOT 150 functions and therefore is good for a complete introduction of the fixture.Select
"Mod1" or "Mod2" by [
running,messages "run/test" blink on the display.
If you want to pause the runnnig program in the required position, press the [
blink ).To continue the program running,press the [
Personality Display
Pan reverse
Tilt reverse
DMX
presetting
Blackout during
mov. correction
Displaypermanent
On
Display intensity
Display- reverse
Pan/Tilt feedback
Music trigger
Microphone
sensitivity
] or [ ] buttons and press [
Default values
(SHADED)
] or [ ] keys to select the "Mod1" or "Mod2"
]-button to confirm the choice.If the test program is
]-button again.
23
]-button(messages"PAUS"/" test"