Table of Contents
Advertisement
1.
Attach the rear brackets to the MSA2324 Carrier-Grade (CG).
2.
Attach the left bracket assembly to the left rack rail.
3.
Attach the right bracket assembly to the right rack rail.
4.
Insert cage nuts into the rack holes.
5.
Align the MSA2324 CG with the rails, and then slide it into the rack until the ears of the MSA2324CG
are about 1 to 2 inches from the rack front rails.
6.
Attach a flat washer between the right mounting ear (bottom hole) and the rack, and then loosely
attach the bracket to the rear bracket assemblies.
7.
Attach the single-hole ground cable lug between the front right mounting ear (top hole) and the rack
with a lock washer and screw.
HP StorageWorks Carrier-Grade 2324fc Modular Smart Array user guide
27
Advertisement
Table of Contents
