Appendix A Specifications - HP t410 Troubleshooting Manual

A Specifications
Table A-1 HP t410 Smart Zero Client
Dimensions
Width (side to side)
Height (top to bottom)
Depth (front to back)
Approximate Weight
Temperature Range (fanless design)*
Operating**
(max. rate of change is 10° C per hour or 18° F per hour)
Nonoperating
(max. rate of change is 20° C per hour or 36° F per hour)
*Specifications are at sea level with altitude derating of
1° C/300 m (1.8° F/1000 ft) to a maximum of 3 Km (10,000
ft), with no direct, sustained sunlight. Upper limit may be
limited by the type and number of options installed.
Relative Humidity (non-condensing)
Operating
(max. wet bulb temperature is 28° C or 84.2° F)
Nonoperating
(max. wet bulb temperature is 38.7° C or 101.6° F)
Maximum Altitude (unpressurized)
Operating
(max. allowed rate of change is 457 m per minute or 1500
ft per minute)
Nonoperating
(max. allowed rate of change is 457 m per minute or 1500
ft per minute)
185 mm
32 mm
148 mm
638 g
10° to 35° C
-30° to 60° C
** The operating temperature range when the thin
client is attached to a flat panel using the HP Quick
Release is 50° to 95° F (10° to 35° C).
3048 m
9144 m
7.3 in.
1.3 in
5.8 in.
22.5 oz
50° to 95° F
-22° to 140° F
10–90%
5–95%
10,000 ft
30,000 ft
23