Wall-Mount Option - Cisco WAP4410N User Manual

Wall-Mount Option

1. On the Access Point's back panel are two cris-cross wall-mount slots.
2. Determine where you want to mount the Access Point, and install two screws that are 2-15/
16" apart.
3. Line up the Access Point so that the wall-mount slots line up with the two screws.
4. Place the wall-mount slots over the screws and slide the Access Point down until the screws
fit snugly into the wall-mount slots.
WAP4410N User Guide
Connecting the Wireless-N Access Point
Placement Options
11