Cisco WAP4410N User Manual page 26

security for the Access Point, refer to "Appendix B: Wireless Security. " To disable wireless
security completely, select Disabled. The default is Disabled.
• Wireless Isolation (within SSID)—When disabled, wireless PCs that are associated to
the same network name (SSID), can see and transfer files between each other. By
enabling this feature, Wireless PCs will not be able to see each other. This feature is very
useful when setting up a wireless hotspot location. The default is Disabled.
The following section describes the detailed options for each Security Mode.
Disabled
There is no option to be configured for this mode.
WPA-Personal (aka WPA-PSK)
• WPA Algorithms—WPA offers you two encryption methods, TKIP and AES for data
encryption. Select the type of algorithm you want to use, TKIP or AES. The default is
TKIP.
• Pre-Shared Key—Enter a WPA Shared Key of 8-63 characters.
• Key Renewal— Enter a Key Renewal Timeout period, which instructs the Access Point
how often it should change the encryption keys. The default is 3600 seconds.
• WPA2-Personal
• WPA Algorithms—WPA2 always uses AES for data encryption.
WAP4410N User Guide
Configuring the Wireless-N Access Point
The Wireless - Wireless Security Tab
21