Table of Contents
Advertisement
Wireless Client List
Instead of manually entering the MAC addresses of each client, the Access Point provides a
convenient way to select a specific client device from the client association table. Click this
button and a window appears to let you select a MAC address from the table. The selected MAC
address will be entered into the Connection Control List.
Connection Control List
•
MAC 01-20—Enter the MAC addresses of the wireless client devices you want to
control.
Radius
•
Primary/Backup RADIUS Server—Enter the RADIUS server's IP address. The Backup
Radius Server will be used only if the primary Radius Server is unavailable.
•
Primary/Backup RADIUS Server Port—Enter the port number used by the RADIUS
server. The default is 1812. The Backup Radius Server will be used only if the primary
Radius Server is unavailable.
•
Primary/Backup Shared Secret—Enter the Shared Secret key used by the Access Point
and RADIUS server. The Backup Radius Server will be used only if the primary Radius
Server is unavailable.
Change these settings as described here and click Save Settings to apply your changes, or click
Cancel Changes to cancel your changes. Help information is displayed on the right-hand side
of the screen.
WAP4410N User Guide
Configuring the Wireless-N Access Point
The Wireless - Connection Control Tab
27
Hide quick links:
Advertisement
Table of Contents
