Table of Contents
Advertisement
You can activate your Kandy Integrated Amplifier in two ways:
1
Press the MODE button (1) on the front panel once.
2
Press the POWER button (2) on the remote handset once.
The Kandy Integrated will 'wake up', the MODE indicator illumination will change to RED, the CD input will be
selected and the CD input indicator (5) will illuminate RED. The amplifier will then automatically check its
input/output status and after a brief moment when no problems are detected, the speaker output relays will click
on and the amplifier starts in normal operation mode responding to all front panel buttons and the remote.
U
S
I
N
G
T
H
E
C
O
N
T
R
U
S
I
N
G
T
H
E
C
O
N
T
R
MODE CONTROL
The MODE button on the Front Panel (1) has the following functions:
• It activates the amplifier from Standby. NOTE: From the Remote Handset, only the POWER Button (2) can put
the amplifier in and out of standby.
• Pressing the MODE button once with the amplifier activated will mute/lower the volume level by 20dB. The
MODE indicator light will change to AMBER. The amplifier remains fully functional in this mode. Another
single press, un-mutes the amplifier and the MODE indicator light will revert to RED.
• When the amplifier is activated, a sustained press on the MODE button will put the amplifier into Standby. All
the input indicator lights will be extinguished and the MODE indicator light will change to GREEN.
NOTE: First time when you bring the Kandy out of STANDBY after switching it ON at the Mains, the input
selector will default to CD (as described previously).
Subsequently however, bringing the Kandy out of Standby from Standby using the MODE or the POWER
(Remote handset) buttons, will restore the selected input and tape values before it was put into Standby.
INPUT SELECTOR BUTTONS
The INPUT Selector Buttons (2, Back) and (3, Forward) march through the inputs one click at a time. They
connect each signal source to the amplifier by marching through the Inputs with the exception of TAPE. Pressing
the Forward Button (3) repeatedly will select inputs in this sequence:
CD - TUNER - VIDEO - LINE1 - LINE2 - PHONO - CD - ...
Pressing the Backward Button (2) repeatedly reverses the sequence.
Whenever an input is selected the appropriate indicator light will illuminate.
VOLUME CONTROL
The VOLUME Control is a precision device. It follows a logarithmic law so that its response approximates that of
the human ear. There is an indicator on the volume control to show the appropriate volume setting.
TAPE MONITOR
When you select an INPUT, the selected source is connected to the amplifier and to the Tape Output Sockets (4)
of the Kandy thus enabling you to record from the selected INPUT.
The Tape Monitor is an override. Pressing the TAPE button (12) connects the output of your tape deck to the
Kandy, overriding the selected input. However, the selected input is left connected to the recording input of your
tape deck. If you have a suitable tape deck, this facility enables you to record a programme whilst monitoring its
playback.
When the TAPE button is depressed, the TAPE Indicator light (11) glows and the selected source Indicator
remains illuminated.
The input selector remains functional when the Tape Monitor is ON thus allowing a range of sources to be
recorded.
Pressing the TAPE button toggles between Tape Monitor ON and OFF.
Roksan Audio ltd
CLASSIFICATION: General Use
All specifications are liable to change without notice. E&OE
O
L
S
O
L
S
Kandy K2 Integrated Amplifier User Manual
Page 7 of 11
Version 3.5
ENGLISH
Hide quick links:
Advertisement
Table of Contents
