R E M O T E H A N D S Et - Roksan Audio Kandy K2 User Manual

R E M O T E H A N D S E T
R E M O T E H A N D S E T
The Kandy K2 Integrated Amplifier is supplied with Roksan's programmable, learning remote handset
and four AAA size 1.5V batteries.
Carefully remove the battery compartment cover and insert the supplied batteries in place observing polarity.
Replace the cover. The handset is now ready for use.
The front panel controls of the Kandy Integrated Amplifier are replicated on the remote handset.
1 KANDY AMP/CD
2 POWER
3 TAPE
4 MODE
5 VOLUME (+)
6 VOLUME (-)
7 INPUT(FORWARD)
8 INPUT (BACK)
9 BACK LIGHT
NOTE:
The LCD display & the hand set
will turn on as soon as the
batteries are inserted. If the
handset is left untouched for 90
seconds, it will automatically turn
off the LCD to save battery life.
The handset is equipped with a
motion sensor and thus will 'wake
up' as soon as it is picked up.
The Back Light will only come on
when the back light button is
pressed and will stay on during
operation. Back light will turn off
automatically after 10 seconds if
none of the buttons are pressed.
1 The KANDY 'AMP/CD' Button (1) selects Kandy Integrated and CD devices ('Kandy' logo on LCD).
2 The POWER Button (2) puts the amplifier in and out of Standby (MODE light GREEN and RED).
3 The TAPE Button (3) connects the Tape Deck In and Out.
4 The MODE Button (4) mutes and un-mutes the output level by 20dB. (MODE light AMBER and RED).
5, 6 The VOLUME Buttons (5 & 6) adjust the output volume level (Increase & Decrease).
7, 8 The INPUT Buttons (7 & 8) march through the input sources (Forward & Back).
9 The BACK LIGHT Button (9) turns on the handset buttons and the LCD display illumination.
Roksan Audio ltd
CLASSIFICATION: General Use
All specifications are liable to change without notice. E&OE
'Kandy' logo
4
5
7
8
6
1
Kandy K2 Integrated Amplifier User Manual
Page 8 of 11
)
(RMX-108
9
2
3
Version 3.5
ENGLISH