Table of Contents
Advertisement
G U A R A N T E E
There are no user-serviceable parts inside your Kandy Integrated Amplifier. If a fault should develop; refer all servicing to your
appointed ROKSAN retailer, distributor or ROKSAN approved service agent.
Your ROKSAN Kandy Integrated Amplifier is guaranteed against any defect in materials and workmanship for a period of two
years from the date of purchase.
This guarantee only becomes effective if the warranty card is validated by the ROKSAN retailer from whom the equipment
was purchased and returned to ROKSAN within 28 days of purchase.
This guarantee excludes:
1. Damage caused due to accident, missuse, neglect and incorrect installation, adjustment or repair.
2. Liability for damage or loss during transit from the retailer or purchaser to ROKSAN or its authorised distributor for the
purposes of repair or inspection.
Carriage costs to ROKSAN shall be borne by the consignor.
All claims under this guarantee must be made through an authorised ROKSAN retailer.
If equipment returned for repair to ROKSAN is found on inspection to comply with the product specification ROKSAN
reserves the right to make a charge for examination and return carriage.
Unauthorised servicing will void this guarantee.
S P E C I F I C A T I O N S
Inputs
Input Impedance
Input Sensitivity (120W)
Outputs
Output Power
Power Supply
Damping Factor
Frequency response
Gain
Harmonic Distortion
Signal to Noise Ratio
Power Source
Power Consumption
Dimension
Weigth
Roksan Audio ltd
CLASSIFICATION: General Use
All specifications are liable to change without notice. E&OE
K a n d y
K a n d y
Line Level (x5), Moving Magnet (x1), Tape (x1), Bypass (x1)
Speaker L & R (x1), Preamplifier (x1), Tape (x1), Headphone (x1)
500VA Ultra Low Noise Toroidal Transformer
Standby <25W, Full Power 2-CH 8Ω < 330 W, 4Ω <550W
Page 10 of 11
K
2
Integrated Amplifier
K
2
K
2
K
2
Integrated Amplifier
K
2
K
2
Line 470mV
>125 Watts, into 8Ω
both channels driven
>190 Watts, into 4Ω
both channels driven
4 Regulated Supply Rails
>110 (8Ω)
(-3dB), <3Hz – >100kHz
37.3dB Overall (Pre & Power)
5.7dB Preamplifier
31.6dB Power Amplifier
<0.005% 1kHz - 8Ω
Line 100dBa (ref 470mV)
100V – 120V 50Hz / 60Hz
220V – 240V 50Hz / 60Hz
432 x 380 x 90 (W x D x H) mm
432 x 380 x 102 (including feet)
Kandy K2 Integrated Amplifier User Manual
47 kΩ
14 Kg
Version 3.5
ENGLISH
Hide quick links:
Advertisement
Table of Contents
