Sleep Operation - Haier HFU-09HA03/R2(DB) Operation Manual

Operation

SLEEP Operation

Before going to bed , you can simply press the
SLEEP button and unit will operation in SLEEP
mode and bring you a sound sleep.
Use of SLEEP function
After the unit starts, set the operation status,
then press SLEEP button before which the
clock must be adjusted and time being set.
Operation Mode
1. In COOL,DRY mode
3 hours after SLEEP mode starts, temperature
o
will become 1 C higher than temperature setting.
After another 3 hours temperature rises by 1
further. The unit will run for further 2 hours then
stops. Temperature is higher than temperature
setting so that room temperature won't be too
low for your sleep.
Remote controller
SLEEP operation starts
1 hr
Temperature setting
2. In HEAT mode
3 hours after SLEEP mode starts, temperature
will become 1
After another 3 hours temperature decrease by
o
1 C further. The unit will run for further 2 hours
then stops. Temperature is lower than
temperature setting so that room temperature
o
C
won't be too high for your sleep.
Temperature setting
1 hr
SLEEP
operation starts
3. In AUTO mode
The unit operates in corresponding sleep
SLEEP mode adapted to the automatically
selected operation mode.
4. In FAN mode
It has timing off function.
5. The sleep time can be adjusted within
the range of 1-8 hours.
Push the SLEEP button. The remote
controller will display "
timing off and detail off time in the timing
off setting area.
Push the time adjusting button to adjust the
detail sleep time.
6. If the sleep time in cooling, dehumidifying
and heating run is less than 8 hours
Within the set sleep time, the conditioner will
run as per the procedure described in 1 and
2. It will be switched off automatically when
the sleep time is expired.
15
SLEEP operation stops
Approx. 6 hrs
o
1 hr Rises 1 C
o
Rises 1 C
Unit stop
In COOL,DRY mode
o
C lower than temperature setting.
Unit stop
Decreases 2 o C
1 hr
o
Decreases 4 C
o
Rises 3 C
3 hr
Approx. 6 hrs
SLEEP
operation stops
In HEAT mode
", and display the