Table of Contents
Advertisement
,
What
s in the Box*
ENGLISH
DVR QUICK START GUIDE
Step 4: Downloading the SmartBridge Software
Step 2: Connecting the Cameras / DVR
Connect the BNC & power from camera with BNC power cable using the side labeled
Insert install CD into CD Rom Drive Double click SmartBridge.exe or let
1
1
"Camera Side"
CDRom run automatically.
2
Using other side of BNC power cable connect BNC to BNC video input on DVR
2
Install SmartBridge Software.
3
Connect power cable to one of the multi power splitter ends
On your computer desktop, Double click installed Smartbridge Software Icon.
3
4
Plug (red) connector on power splitter to 12V DC input on DVR
4
Select the Connect Tab. Enter Auto ID DVR Code (On DVR system, right click and
Product Contents
5
Plug DVR power supply into wall outlet
select "Net Status" to obtain Auto ID DVR Code). Password is default 123. Select
Login to start viewing your Smartbridge security system remotely.
1
Power
MENU
1
2
3
4
BNC VIDEO & DC POWER CABLE
IR
1
2
3
4
Rec
ESC
(1 supplied with each camera)
DVR
2
4
3
(5 or 9-Way Power Splitter)
CAMERA(S)
POWER SUPPLY
5
1
DVR & CAMERAS
(Attach for each camera)
2
REMOTE CONTROL &
USB 2.0 MOUSE
RJ45 ETHERNET CABLE
Step 3: Connecting your Mouse and Ethernet Cable
Connect the USB mouse to the bottom USB slot on the back
1
4
POWER SPLITTER FOR
WARNING
2
Connect the Ethernet cable to the back of the DVR labeled either NET or RJ45
DVR AND CAMERAS
24 HOUR VIDEO SURVEILLANCE
THESE PREMISES ARE UNDER
STICKERS
3
Connect the other end of the cable directly to your router, modem or high speed
PROTECTED BY
(9 way supplied with 8 Camera systems;
internet connection input
3
5 way supplied with 4 camera systems)
Note: Please consult the networking section of your manual to configure the DVR for
remote viewing.
Step 1: Connect the DVR to your Monitor or TV
1
(Monitor Option)
Connect a VGA cord (not included) from your monitor to the VGA Output port on the back of your DVR.
1
(TV Option)
3
Back of DVR
Connect the end of the BNC-RCA (BNC SIDE ONLY) cable to the back of the
DVR labeled "Video Output"
iPhone, iPad, Android Compatible*
2
2
Connect the BNC-RCA (RCA SIDE ONLY) cable to an open video (yellow RCA) input on your TV/Monitor
BACK of DVR
Go to firstalert.com and search for model # to find complete instruction manual of
(note the input name or number)
your First Alert DVR.
3
Turn on your TV and select the appropriate input (noted above)
© 2012 BRK Brands, Inc. All rights reserved. Distributed by BRK Brands, Inc., Aurora, Illinois
60504. BRK Brands, Inc. is a subsidiary of Jarden Corporation (NYSE: JAH). First Alert® is a
registered trademark of the First Alert Trust. Due to continuing product development, the product
1
inside the packaging may look slightly different than the one on the package. To obtain warranty
3
service, contact the Consumer Affairs Division at 1-800-323-9005, Monday through Friday, 7:30
1
a.m. - 5 p.m., Central Standard Time.
2
1
VGA
* iPhone and iPad are registered trademarks of Apple Inc. Android is a trademark of Google, Inc.
www.firstalert.com
Quick Install Guide
60' BNC Video &DC Power Cables
(One for each camera. Varies with kits depending
on number of cameras included.)
Power Supply
for DVR
PRODUCT OVERVIEW
H.264 4,8 or 16 channel Digital DVR
with 500 GB, 1 TB or 2TB Hard Drive
DVRAD0405/DVRAD0805: 500 GB
DVRAD0810/DVRAD1610: 1TB
DVRAD1620: 2TB
Installation
Software
Remote Control
PACKAGE CONTENTS
RJ45 Ethernet Cable
9-way splitter
or two splitters for 16
channel
Page 7
WARNING
THESE PREMISES ARE UNDER
24 HOUR VIDEO SURVEILLANCE
PROTECTED BY
3 Window
Warning Decals
USB 2.0 Mouse
Hide quick links:
Advertisement
Table of Contents
