Clients; Network Operation - First Alert SmartBridge DVRAD0405 User Manual

will move while being controlled
manually. Certain PTZ camera will use
only part of the range.
• Zoom: "+" zooms in and "-" zooms
out
• Focus: "+" and "-" focuses the pic-
ture.
• Iris: "+" lets more light in and "-"
removes light from the picture. This is
useful to correct backlight issues.
• Directional keys: left and right arrows
control the pan; up and down arrows
control the tilt.
Setting Of Presets
Presets are camera positions setup in
advance. The DVR can control the camera
to move the PTZ camera to the proper
preset position.
To set up a preset, click more from the PTZ
manual control screen, to gain access to
the PTZ patrol screen. and then click set
to create preset positions. See PTZ preset
screen.
To set up a preset use the ptz preset
screen. do the following:
1. Use the directional arrows to set camera
to the preset position desired.
2. Place a preset number in the box next to
add and input the length of time, number
of seconds you would like the preset to
be positioned at the preset.
3. Click add. The newly added preset will
now be available in the preset drop down
field.
4. Repeat the process to add the proper
number of presets desired.
Viewing A Preset
Presets may be viewed by selecting
the appropriate preset using the drop
down and then clicking goto. this can be
accomplished on either the PTZ patrol
screen or the PTZ preset screen.
Executing A Patrol (Tour)
Use the PTZ patrol screen to set up a
patrol. The patrol will move from one
preset to the next preset in the order
that is indicated in the drop down. When
executed, the patrol will remain at a
camera preset position The length of time
indicated under stay time for that preset.
Click start patrol to start the patrol. Click
stop patrol to stop the camera from
patrolling through camera presets.

NETWORK OPERATION

Clients

This menu will display a current list
of network users logged onto the
DVR. The menu will allow a user of
the DVR to disconnect one or all
network users from this screen.
• Channel
Network
pathway that
connected user
is using
• Disconnect
Will disconnect a
selected network
user
Page 33
CLIENTS
• IP • Port
IP address of Open port on
network user router that
network user is
logged through
• Connections • Disconnect All
Number of
connected
network users
Will disconnect all
network users