First Alert DCAD4205-480M Quick Start Manual

DVR Quick Start Guide

DCAD4205-480M
Whats Included
USB 2.0 Mouse Power Supply*
2 Cameras
DVR & Cameras
Intial Setup
1 2
Right Click anywhere on the screen and select Admin is the default User Name. Enter the default
"Main Menu" Password 123456 (Be sure to change your
password for security purposes). Click Ok
4 5
Select "Network" Make sure DHCP is selected, do so if not
7
Make sure Enable is "Open" and not closed. Select "Ping" if needed to connect the DVR to your network. State should read online
to let you know you are online and ready to go. Do not leave this Page. The QR code displayed will be used for the Mobile App
Installation. Download IMSeye Mobile App from either the iTunes store or Google Play store. To exit menus, right click mouse.
DVR
Ethernet Cable Power Splitter Remote Software
Installation Disc
3
Select "Configuration"
6
Select "P2P" tab at the top of the menu
DVR & Camera Connections
Step 1
Video Display
HDMI
Connect a HDMI cord from your monitor or TV to
the HDMI Output port on the back of your DVR.
Step 2
USB Mouse
USB
Connect the USB mouse to the USB slot on the
back of the DVR.
Note: USB mouse and ethernet cable input locations may
vary model to model.
Step 4
Camera
A B
WARNING
THESE PREMISES ARE UNDER
24 HOUR VIDEO SURVEILLANCE
PROTECTED BY
Stickers
Connect BNC Cable labeled Connect the "DVR side" power
"DVR side" to an open "Video cable to the splitter.
In" slot/connector of the DVR.
App Setup
Download App- IMSeye
(IMAGE 1)
(IMAGE 3)
From The App Main screen select the Home Button
select Device List . Select the
(IMAGE 2)
Select the amount of channels of your DVR. Select P2P. Enter a Name for
your Device . We used Home. Select the QR code button and scan
(IMAGE 4)
the QR code that is displayed on your monitor in the P2P section
the Password that is displayed on your DVR in the P2P section. Click the
save button once, then the back button twice, and the live view button
once. You should now be connected on your mobile device.
VGA BNC
Connect a VGA cord from your monitor or TV to the Connect the end of the BNC cable (not included) to
VGA Output port on the back of your DVR. the back of the BNC connection on the DVR labeled
"Video Output"Connect the BNC cable to the BNC
input on your TV/Monitor
(Note: If your TV or monitor does not have a BNC connection it is still
possible to connect your DVR via the BNC output using a BNC-RCA
adaptor and cable (not included). This may be useful if you decide to
connect a monitor or TV via each of the 3 Video out connections from
your DVR.)
Step 3
Powering DVR
3
2
POWER
1
Connect the DVR to one of the multi-splitter ends (1). Connect the
multi-splitter, single end, to the power adapter (2). Plug the power adapter
into a surge protector (3) .
(not included)
C D
Connect BNC Cable labeled Connect the "Camera side"
"Camera side" to the camera. power cable to the camera.
(IMAGE 2)
Go to firstalert.com or brkelectronics.com to find complete
instruction manual for your First Alert DVR.
(IMAGE 4)
© 2014 BRK Brands, Inc. All rights reserved. Distributed by BRK
. Next
(IMAGE 1)
Brands, Inc., Aurora, Illinois 60504. Due to continuing product
button on the bottom.
(IMAGE 3) development, the product inside the packaging may look slightly
different than the one on the package. 1 Year Limited Warranty – see
inside for details. BRK Brands, Inc. is a subsidiary of Jarden
Corporation (NYSE: JAH).
7 . Enter
1
Repeat Steps A-D
for adding
additional cameras.
www.firstalert.com