Alarm Menu - First Alert SmartBridge DVRAD0405 User Manual

Alarm Menu

(Continued)
Path: System Setup>Alarm
• Channel
Indicates
the channel
• Enable
Sets the alarm settings for a
channel to on or off
• Alarm Output
Determine how the system iniates the Alarm alerts,
including sending an email, sounding a buzzer, etc.
SYSTEM SETUP
• Keep Alarm
How long the alarm will be active
before being cancelled
• Turn on Buzzer
Activate DVR alarm buzzer
• Send to Client
Alarm will be forwarded to another
connected DVR
• E-Mail Client / Send Snapshot
Send email notifying addressee
of alarm, and select if a photo of
channel is sent
• Start to Record
Select channel to record when
current channel sets alarm
• Call Preset
Begin PTZ camera preset for a
channel. NOTE: The alarm channel
and PTZ channel can be two
seperate channels
• Snapshot
Take a photo of a channel. NOTE: The
alarm channel and Snapshot channel
can be two seperate channels
• Output Module
Send email notifying addressee
of alarm, and select if a photo of
channel is sent. NOTE: The alarm
channel and Snapshot channel can
be two seperate channels
• Work Mode
Indicates wether the alarm channel
switch is normally open or closed
• ID
Indicates the channel, only the first 4
can receive an external alarm signal
Page 23
ALARM MENU